Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and standing voltage wave ratio (VSWR) (IEC 60512-25-7:2004); German version EN 60512-25-7:2005
€111.40
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995 + A1:2000); German version EN 60603-2:1998 + A1:2005.
€185.05
Solderless connections - Part 6: Insulation piercing connections; general requirements, test methods and practical guidance (IEC 60352-6:1997); German version EN 60352-6:1997.
€91.03
Solderless connections - Part 1: Wrapped connections; general requirements, test methods and practical guidance (IEC 60352-1:1997); German version EN 60352-1:1997
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 60603-6:1987); German version EN 60603-6:1998
€116.64
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 × 2,54 mm centre-line (IEC 61076-3-101:1997); German version EN 61076-3-101:1997
€128.22
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests; Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997); German version EN 60512-14-17:1998
€41.78
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification: General requirements and guide for the preparation of detail specifications, with assessed quality (IEC 60603-1:1991 + A1:1992); German version EN 60603-1:1998
€105.42
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (O,1 in) centres and staggered terminations at that same spacing (IEC 60603-3:1987); German version EN 60603-3:1998
€98.32
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing (IEC 60603-4:1987); German version EN 60603-4:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987); German version EN 60603-5:1998
€122.34
Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm × 0,63 mm (IEC 60603-8:1990); German version EN 60603-8:1998
€140.00
Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990); German version EN 60603-9:1998
€162.06
Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type (IEC 60603-10:1991); German version EN 60603-10:1998
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated cicuits (IEC 60603-12:1992); German version EN 60603-12:1998
