Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry (IEC 61300-3-47:2014); German version EN 61300-3-47:2014
€98.32
Fibre optic interconnecting devices and passive components - Performance standards - Part 1: General and guidance (IEC 86B/3828/CD:2014)
€162.06
Fibre optic interconnecting devices and passive components - Performance standard - Part 042-2: Plug-pigtail-style and plug-receptacle-style OTDR reflecting devices for category C - Controlled environments (IEC 61753-042-2:2014); German version EN 61753-042-2:2014
Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3; German version EN 50516-3-1:2014
€145.14
Fibre optic interconnecting devices and passive components - Performance standard - Part 031-6: Non-connectorized single-mode 1xN and 2xN non-wavelengthselective branching devices for Category O - Uncontrolled environment (IEC 61753-031-6:2014); German version EN 61753-031-6:2014
€105.42
Fibre optic interconnecting devices and passive components - Performance standard - Part 031-2: Non-connectorized single-mode 1×N and 2×N non-wavelength-selective branching devices for Category C - Controlled environment (IEC 61753-031-2:2014); German version EN 61753-031-2:2014
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords (IEC 86B/3859/CD:2014)
€63.27
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30 : examinations and measurements - Endface geometry of rectangular ferrule
€111.67
Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1 : generic specification
€99.97
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4 : tests - Fibre/cable retention
€88.33
Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6 : single mode fibre non-connectorized fixed attenuator - Category O in outside plant environment
€95.67
Fibre optic interconnecting devices and passive components - Reliability - Part 9-4 : high power qualification of passive optical components for environmental category C
Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 18-1 : type 4+4x10.3125 Gb/s MPO (QFSP) transceiver mated with an MPO connector equipped with 12 fibre PPS ferrules terminated on EN 60793-2-10 category A1a.3a or A1a.3b 50/125 micron multimode fibre - Jeux de connecteurs et composants d'interconnexion à utiliser dans les systèmes de communication par fibres optiques - Spécifications de produits - Partie 18-1 : Emetteur-récepteur de type 4+4x10,3125 Gb/s MPO (QFSP) accouplé à un connecteur MPO équipé de férules PPS pour 12 fibres raccordé sur des
€116.33
Fibre optic active components and devices - Test and measurement procedures - Part 3 : optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces - Composants et dispositifs actifs à fibres optiques - Procédures fondamentales d'essais et de mesures - Partie 3 : variation de puissance optique induite par des perturbations mécaniques dans les interfaces d'embases et d'émetteurs-récepteurs optiques
€106.33
Dynamic modules - Part 3-1 : performance specification templates - Dynamic channel equalizers - Modules dynamiques - Partie 3-1 : Modèles de spécification de performance - Égaliseurs de canaux de transmission dynamiques.
€69.33
