Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
€165.00
Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy wire for thread inserts (0.45 mm to 2 mm diameter) (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
€81.00
Specification for nickel-chromium-titanium heat-resisting alloy bar, wire and rivets (nickel base, Cr 19.5, Ti 0.4)
Specification for nickel-chromium-iron-titanium-niobium-aluminium heat-resisting alloy round wire for thread inserts (maximum diameter 2 mm) (nickel base, Cr 15.5, Fe 7.0, Ti 2.5, Nb/Ta 0.95, Al 0.70)
Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 20 mm)
Specification for ingots and castings of aluminium-silicon-copper-iron-nickel-magnesium alloy (precipitation treated) (Si 2.5, Cu 1.2, Fe 1, Ni 1, Mg 0.1)
Specification for wire for solid, cold-forged rivets of aluminium-5% magnesium alloy (not exceeding 10 mm diameter)
Specification for ingots and castings of aluminium-silicon-copper-magnesium alloy (solution treated and precipitation treated) (Si 5, Cu 1.2, Mg 0.5)
Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
Specification for bars and extruded sections of aluminium-copper-silicon-magnesium alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 1.5, Si 1, Mg 0.8)
Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
Specification for wire for solid, cold-forged rivets of aluminium-copper-magnesium alloy (not exceeding 10 mm diameter) (Cu 2.5, Mg 0.3)
Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
Specification for aluminium-alloy-coated sheet and strip of aluminium-zinc-magnesium-copper-chromium alloy (solution treated and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)
Specification for plate of aluminium-copper-magnesium-manganese alloy (solution treated, controlled stretched and aged at room temperature) (Cu 4.4, Mg 1.5, Mn 0.6)
