Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison; German version EN 13523-3:2014
€56.17
Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version EN 13523-5:2014
€48.79
Coil coated metals - Test methods - Part 4: Pencil hardness; German version EN 13523-4:2014
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015); German version EN ISO 14920:2015
€69.91
Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015); German version EN ISO 14919:2015
€84.58
Vitreous and porcelain enamels - Determination of thermomechanical properties by means of a rapid test method
€77.20
Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects on profiled surfaces - Slurry test
€34.30
Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3; German version EN 14462:2015
€105.42
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO/DIS 8503-5:2014); German version prEN ISO 8503-5:2014
Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015); German version EN ISO 4528:2015
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2010); German version EN ISO 2143:2010
Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010); German version EN ISO 7599:2010
€98.32
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2010); German version EN ISO 2931:2010
€63.27
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011); German version EN ISO 2106:2011
