ASTM C1160-97(2012)

Standard Specification for Chemical-Resistant Carbon Brick (Withdrawn 2021)

Preview

Description

Features

Life cycle

Historical

Summary

1.1 This specification covers machine made solid uncored carbon brick produced from either metallurgical or petroleum calcined coke, baked to a minimum 1850°F (1010°C), and suitable for use in masonry construction which will be exposed to various chemicals. These units are designed primarily for industries using hydrofluoric acid, fluoride salts, and high concentrations of alkalies such as sodium and potassium hydroxide. Carbon brick are normally used with carbon filled chemical-resistant mortars.

TABLE 1 General Guide to Chemical Resistance of Carbon Brick

Note 1—This table is intended for use as a general guide to the resistance of carbon brick in immersion service at ambient temperatures. Specific recommendations should be obtained from the carbon brick manufacturer. Carbon brick can be used to 650°F (340°C). Over 650°F (340°C), strict environmental control is paramount to ensure that the environment is non-oxidizing.

Medium	Chemical Resistance^A
Nitric Acid, to 40 %	R
Hydrofluoric Acid, to 40 %	R
Blend—25 % Nitric, 10 % Hydrofluoric, 65 % Water	R
Hydrochloric Acid, to 35 %	R
Phosphoric Acid, to 75 %	R
Sulfuric Acid, to 50 %	R
Sodium Hydroxide, to 50 %	R
Potassium Hydroxide, to 50 %	R

^A R = Recommended.

TABLE 2 Physical and Chemical Requirements

Property	Value
Compressive Strength, psi (MPa), min	6000 (41)
Modulus of Rupture, psi (MPa), min	1500 (10)
Water Absorption, %, max	10
Ash,% , max	8

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Rationale:

This specification covers machine made solid uncored carbon brick produced from either metallurgical or petroleum calcined coke, baked, and suitable for use in masonry construction. This material is normally used with carbon filled chemical-resistant mortars. The carbon brick shall exhibit chemical resistance to the following chemical media: nitric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, sulfuric acid, sodium hydroxide, and potassium hydroxide. It shall also comply with the specified values for compressive strength, modulus of rupture, water absorption, and maximum ash content.

Notes

Reapproval

Technical characteristics

Publisher	American Society for Testing and Materials (ASTM International)
Publication Date	03/10/1997
Confirmation Date	08/01/2012
Cancellation Date	01/21/2021
Collection
Page Count	2
Themes	Refractories
EAN	---
ISBN	---
Weight (in grams)	---