DIN EN 16510-1:2018-11

This European Standard is applicable to residential solid fuel burning appliances. This Part 1 of Standard Series EN 16510 is to be used in conjunction with the appropriate Part 2. Part 2 contain clauses to supplement or modify the corresponding clauses in Part 1. Together Part 1 with the relevant Part 2 provides the requirements for each type of appliance. Standard Series EN 16510 will supersede EN 13240:2001, EN 13229:2001, EN 12815:2001, EN 12809:2001. This European Standard specifies requirements relating to the design, manufacture, construction, safety and performance (efficiency and emission) of appliances fired by solid fuel and provides instructions for them. Furthermore, it also gives provisions for the evaluation of conformity i.e. initial type testing (ITT) and factory production control (FPC) and marking of these appliances. This European Standard also covers CO, NOx, OGC and particulate matter emission test methods, however this European Standard does not contain any values for the limit on these emissions. This European Standard is not applicable to appliances with boiler parts in contact with fire or flue gases other than when the boiler parts are manufactured from steel or cast iron. This Standard is not applicable to appliances with a boiler with water temperatures above 110 °C and/or an operating pressure of more than 3 bar and direct contact with sanitary hot water. This European Standard does not cover appliances to be operated with ventilating systems which are intended to operate with pressure below - 15 Pa in the room of installation of the appliance in relation to the outside atmosphere.