NF ISO 22915-1, H96-316-1 (06/2024)

ISO 22915-1:2016 addresses the safety of industrial trucks as defined in ISO 5053-1 regarding their stability and the verification of this stability. For the purposes of this International Standard, industrial trucks are wheeled, self-propelled or manually propelled vehicles with the exception of those traveling on rails. They can be with or without a driver and are designed to transport, tow, push, lift, stack and store in racks. ISO 22915-1:2016 specifies the basic test criteria and requirements for verifying the stability of industrial trucks, hereinafter referred to as trolleys. It applies to the following truck types and special conditions: a) mast-mounted cantilever trucks, as specified in ISO 22915-2; b) retract trucks and forklifts between stringers, as specified in ISO 22915-3; c) stacker pallet trucks, double stackers and order pickers with the operator in the elevated position up to a lifting height less than or equal to 1 200 mm, as specified in ISO 22915-4; d) side loading trolleys, as specified in ISO 22915-5; e) bidirectional and multidirectional carriages, as specified in ISO 22915-7; f) additional stability test for trucks working in special stacking conditions with the mast tilted forward, as specified in ISO 22915-8; g) cantilevered trucks with mast handling containers 6 m (20 ft) long and more, as specified in ISO 22915-9; h) additional stability test for trucks working in special conditions with the load laterally offset by motor-driven devices, as specified in ISO 22915-10; i) variable reach industrial trucks, as specified in ISO 22915-11; j) variable reach industrial trucks handling cargo containers 6 m (20 ft) long and above, as specified in ISO 22915-12; k) variable reach all-terrain trucks, as specified in ISO 22915-14; l) trucks with articulated steering device working in cantilever, as specified in ISO 22915-15; m) pedestrian trolleys, as specified in ISO 22915-16; n) additional stability test for trucks working in special conditions with an offset load, offset by use, as specified in ISO 22915-20; o) order picking trucks with an operator station elevable above 1 200 mm, as specified in ISO 22915-21. It also applies to trucks operating under the same conditions when equipped with load handling equipment. ISO 22915-1:2016 does not apply to the following: - trucks handling suspended loads which can oscillate freely, - low lift trucks whose lift height is less than or equal to 500 mm.
(Automatic translation from French)