DIN 68100:2010-07
Active Standard
Most Recent

DIN 68100:2010-07

Tolerance system for wood working and wood processing - Concepts, series of tolerances, shrinkage and swelling

Summary

The tolerance system applies to length dimensions, angle dimensions and inclinations with an agreed moisture content of the parts. The system of specified tolerance ranges provides for the choice of suitable tolerances for parts which shall be joined together without rework.

Technical characteristics

Publisher Deutsche Institut für Normung e.V. (DIN)
Publication Date 07/01/2010
Page Count 25
EAN ---
ISBN ---
Weight (in grams) ---
No products.

Previous versions

DIN 68100:2010-07

DIN 68100:2010-07

Tolerance system for wood working and wood processing - Concepts, series of tolerances, shrinkage and swelling
01/07/2010
Active
Most Recent
DIN 68100:2008-09

DIN 68100:2008-09

Tolerance system for wood working and wood processing - Concepts, series of tolerances, shrinkage and swelling
01/09/2008
Superseded
Historical
DIN 68100:1984-12

DIN 68100:1984-12

Tolerance system for wood working and wood processing; concepts, series of tolerances, shrinkage and swelling
01/12/1984
Superseded
Historical
DIN 68100 Beiblatt 3:1978-06

DIN 68100 Beiblatt 3:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture, radial and tangential to the grain of red-meranti, muhuhu, niangon, walnut, aspen (poplar), utile, teak, elm and wenge (panga panga)
01/06/1978
Superseded
Historical
DIN 68100 Beiblatt 4:1978-06

DIN 68100 Beiblatt 4:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard
01/06/1978
Superseded
Historical
DIN 68100 Beiblatt 1:1978-06

DIN 68100 Beiblatt 1:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture parallel to the grain of solid wood, radial and tangential to the grain of spruce, fir, larch, pine and oregon-pine
01/06/1978
Superseded
Historical
DIN 68100 Beiblatt 2:1978-06

DIN 68100 Beiblatt 2:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture radial and tangential to the grain of afrormosia, afzelia, ekki, beech, oak, ash, iroko, khaya (african mahagony), macore and yellow meranti
01/06/1978
Superseded
Historical
Contact us