DIN 68100 Beiblatt 1:1978-06
Superseded Standard amendment
Historical

DIN 68100 Beiblatt 1:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture parallel to the grain of solid wood, radial and tangential to the grain of spruce, fir, larch, pine and oregon-pine
Most recent standard

Summary

Toleranzen für Längen- und Winkelmaße in der Holzbe- und -verarbeitung; Maßänderung durch Feuchtigkeitseinfluß längs zur Faser bei Vollholz, radial und tangential bei Fichte, Tanne, Lärche, Kiefer und Douglasie

Technical characteristics

Publisher Deutsche Institut für Normung e.V. (DIN)
Publication Date 06/01/1978
Page Count 8
EAN ---
ISBN ---
Weight (in grams) ---
No products.

Previous versions

DIN 68100:2010-07

DIN 68100:2010-07

Système de tolérances pour le traitement et le travail du bois - Termes, séries de tolérances, dimensions de retrait et de gonflement
01/07/2010
Active
Most Recent
DIN 68100:2008-09

DIN 68100:2008-09

Tolerance system for wood working and wood processing - Concepts, series of tolerances, shrinkage and swelling
01/09/2008
Superseded
Historical
DIN 68100:1984-12

DIN 68100:1984-12

Tolerance system for wood working and wood processing; concepts, series of tolerances, shrinkage and swelling
01/12/1984
Superseded
Historical
DIN 68100 Beiblatt 3:1978-06

DIN 68100 Beiblatt 3:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture, radial and tangential to the grain of red-meranti, muhuhu, niangon, walnut, aspen (poplar), utile, teak, elm and wenge (panga panga)
01/06/1978
Superseded
Historical
DIN 68100 Beiblatt 4:1978-06

DIN 68100 Beiblatt 4:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard
01/06/1978
Superseded
Historical
DIN 68100 Beiblatt 1:1978-06

DIN 68100 Beiblatt 1:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture parallel to the grain of solid wood, radial and tangential to the grain of spruce, fir, larch, pine and oregon-pine
01/06/1978
Superseded
Historical
DIN 68100 Beiblatt 2:1978-06

DIN 68100 Beiblatt 2:1978-06

Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture radial and tangential to the grain of afrormosia, afzelia, ekki, beech, oak, ash, iroko, khaya (african mahagony), macore and yellow meranti
01/06/1978
Superseded
Historical
Contact us